Marquise Diamond Guide: How to Judge Size, and Quality

on Nov 19 2026
Table of Contents

    Share

    Marquise diamonds have an almond-like shape, and it’s an interesting diamond shape for a modern-looking engagement ring. Not just that, there’s a romantic history behind its invention, plus a few characteristics that no other diamond shape possesses. So let’s find out every interesting and not-so-interesting thing about the marquise diamond, so you can decide whether you should get one or not.

    What Is a Marquise Diamond?

    A marquise diamond is an elongated brilliant-cut diamond with curved sides and a sharp point at each end. People call it a boat, a football, an almond, or an eye, and jewelers sometimes use the older word navette, which is French for “little boat.”  And there’s so much more to it, and it starts with the parts.

    • Points: the two sharp ends.

    • Belly: the widest part, right in the middle.

    • Wings: the curved sides running from the belly toward each point.

    • Girdle: the thin outer edge of the stone, where prongs or a bezel hold it.

    • Keel line: the line along the bottom of the stone, running point to point.

    Keep the points in mind, because almost every good and bad thing about marquise shape traces back to them.

    As far as history is concerned,  the legend says King Louis XV of France asked a royal jeweler for a diamond shaped like the lips of Madame de Pompadour (some tellings say her smile), whose title was the Marquise de Pompadour, and the shape took her title as its name. It’s a legend, so enjoy it like one. 

    How Big Does a Marquise Diamond Look?

    Everyone says a marquise looks bigger than other diamond shapes. True, but let’s pile up the why, because it also tells you what you’re trading for it. Carat is weight, not size. A marquise spreads its weight along its length, so the surface you see from above stretches out. It looks bigger because it’s longer, not because it’s wider. On the finger, that length covers more skin, and that’s the effect you’re paying for.

    Marquise Diamond Size Chart

    0.50 ct

    8-9 × 4-4.5 mm

    1.00 ct

    10-11 × 5-5.5 mm

    1.50 ct

    11.5-13 × 6-6.5 mm

    2.00 ct

    13-14 × 6.5-7 mm

    Length-to-Width Ratio: The Number That Changes the Whole Look

    Two marquise diamonds with the same carat weight can look very different. The main reason is their length-to-width ratio, which tells you how long and slim a diamond looks. You calculate it by dividing the diamond’s length (from tip to tip) by its width (across the widest part). For example, a diamond measuring 10 mm long and 5 mm wide has a ratio of 2.0.

    So, what ratio should you choose? GIA describes a classic marquise shape as roughly twice as long as it is wide. Most marquise diamonds it examines have ratios between 1.6 and 2.2. For buyers, it suggests looking at 1.75 to 2.25.

    Different retailers recommend slightly different ranges, such as 1.75 to 2.15 or 1.7 to 2.3. There is no single correct ratio. It comes down to how you want your diamond to look. A higher ratio gives you a longer, slimmer shape, while a lower ratio gives you a wider appearance.

    How to Pick The Right Ratio 

    If you wear your ring every day, a ratio close to 2.0 or slightly lower is a practical choice. If you prefer a longer look, you can choose a higher ratio, but make sure the setting protects the pointed ends. 

    The Bow-Tie Effect: Flaw or No Big Deal?

    two marquise dimaonds. One has faint bow tie, another one show strong bow tie effects

    Ask anyone about marquise diamonds and the bow-tie comes up within a minute, usually as a warning. (A bow-tie is an ugly dark spot, so avoid it). No, there’s more to it.

    A bow-tie is a darker band across the middle of the stone that looks like a bow tie. It happens because some facets in the center don’t send light back to your eye, and it shows up in elongated shapes like marquise, oval, and pear. It’s not an inclusion, and it’s not a sign of sloppy work. A stone can be cut with great precision and still show one, because it comes from the design of the cut.

    Three things that might surprise people about bow-tie:

    1. It won’t be on your certificate: Grading reports don’t mention bow-ties, and GIA doesn’t give fancy shapes an overall cut grade, so nothing on paper tells you how strong it is.

    2. You can usually reduce it but not remove it: Cutters sometimes cut a stone a little deeper to soften it, and well-made stones can have a very faint one.

    3. A small one isn’t a flaw: Some people find a mild bow-tie adds a bit of extra sparkle in the center.

    Here’s a simple scale to judge how strong bow-tie is:

    • Faint: you only notice it when you tilt the stone or lean in close.

    • Moderate: visible face-up, but the stone still looks bright overall.

    • Strong: a dark band that’s the first thing your eye goes to.

    To check one before you buy:

    1. Ask for a 360° video and close-up photos, not just a single hero image.

    2. Look at the stone straight on, then watch how the dark area changes as it rotates.

    3. View it from a few distances, since a bow-tie can look more obvious as you lean in.

    4. If you can, compare two stones with a similar ratio side by side. The difference jumps out.

    5. Buy from somewhere with a solid return policy, so you can look at it in your own lighting.

    How to Judge a Marquise Diamond: 4Cs, Symmetry and Certificate 

    Most people start by looking at the 4Cs, but marquise diamonds have a few extra details worth checking.

    • Start with the cut: GIA does not give fancy-shaped diamonds an overall cut grade. So, pay attention to the diamond's shape and symmetry. The two pointed ends should line up, both sides should look even, and the bow-tie should not be too dark or noticeable.

    • Then check the color: Marquise diamonds can show more color near their pointed ends. Look at the actual diamond instead of choosing a grade based on numbers alone.

    • Next, look at clarity: Where an inclusion sits matters. An inclusion near the pointed ends can be more concerning than one in the middle of the diamond.

    • Finally, check the grading report: Get a GIA or IGI report to confirm the diamond's measurements and grades. Also, ask for a video because the report won't show how noticeable the bow-tie is. 

    Read In Detail About:

    Are Marquise Diamonds Fragile? Protecting the Points

    marquise diamond east-west engagement ring

    The shallow answer is “yes, they’re fragile, so avoid them.” No, that’s too simple. Any diamond can chip, and a marquise’s weak spot is just very easy to point at. The two points are more exposed than the rounded edges of other shapes, and if they’re set high or left uncovered, they can also catch on clothing and hair. To fix this chipping issue, choose the setting well.

    Setting

    How it protects

    V-prongs

    A V-shaped prong wraps each tip

    Half-bezel

    Metal wraps and covers the points while the belly stays open

    Full bezel

    Metal runs around the entire stone

    Another option is to set the marquise diamond horizontally across your finger, with the pointed ends facing either side. This is called an east-west setting and gives the ring a more modern look.

    Marquise vs Oval vs Pear

    marquise solitaire engagement ringOval diamond solitaire engagement ring featuring a hidden halo in sterling silverpear diamond solitaire engagement ring

    These three elongated shapes get compared constantly. They all stretch the stone along the finger, and they can all show a bow-tie. Here are a few differences between them:


    Marquise

    Oval

    Pear

    Points

    Two

    None

    One

    How big it looks

    The biggest of the three

    Close behind

    Close behind

    Durability

    Two points to protect

    The most resilient, with nothing sharp to chip

    One point to protect

    The vibe

    Bold and dramatic

    Soft and classic

    Romantic, like a teardrop

    • Choose the marquise if you want maximum length and a statement and you’re happy to protect the points. 

    • Choose the oval if you want the elongated look with the least worry. 

    • Choose the pear if you hybrid shape combining oval and marquise.

    Marquise Diamond Price

    The price of a marquise diamond depends on: 

    • The length-to-width ratio
    • How strong the bow-tie is
    • The color, the clarity, the carat weight
    • Whether it’s natural or lab-grown. 

    However, prices can vary from one seller to another, even for diamonds with the same specifications. This can depend on the seller's pricing, grading certificate, taxes, markups, and the diamond's origin. So, there is no single fixed price for a marquise diamond. Instead of focusing only on the price, look for a reliable seller and a well-graded diamond that offers good value for your budget.

    Who Suits a Marquise, and How to Wear It Beyond the Ring

    Because the shape runs along the finger, it gives an elongating, slimming effect, which is why many people with smaller or shorter hands love it. But proportion beats rules, so try one on before you decide. A slender ratio exaggerates the effect, and a wider one keeps it subtle.

    Style-wise, it can go either way. A simple solitaire in a clean setting reads modern, while the shape’s history gives it a retro pull for anyone who likes that. And it isn’t only for rings. Marquise diamonds work in earrings, necklaces, and tennis bracelets too, and in those the points generally take fewer knocks than they do on a hand.

    Should You Get a Marquise Diamond?

    A marquise is a great pick if you want a stone that looks big for its weight, reads modern, and has a story to tell. It asks a little more of you than a round does: you have to judge the ratio and the bow-tie with your own eyes, and you have to protect the points. If you’re fine with that, it’s hard to beat. If you’d rather not think about it at all, an oval gives you a similar elongated look with no points to worry about.

    When you’re ready, our marquise cut engagement ring buying guide walks through the ring styles, and you can browse our marquise diamonds engagement ring collection to shop those styles.

    Also Read: 

    Sources:

    Frequently Asked Questions

    Round diamonds are known for their sparkle, but marquise diamonds can sparkle beautifully too. Both have brilliant-cut facets that reflect light. A well-cut marquise diamond with good symmetry and a faint bow-tie can have plenty of sparkle.

    The pointed ends of a marquise diamond can leave a gap between the engagement ring and a straight wedding band. A curved or notched band can help the two rings sit closer together.

    Clean your ring with warm water, mild dish soap, and a soft brush. Be gentle around the pointed ends and prongs to avoid damage. Store it separately from other jewelry to prevent scratches.

    A jeweler can assess it, and re-polishing the tip is sometimes an option. The catch is that polishing removes material, so it can cost a little weight and change the shape slightly. If it ever happens, get a jeweler’s opinion before you decide.

    You don't need to reset a vintage marquise ring just because it looks old. First, ask a jeweler to check the diamond for chips, especially at the pointed ends, and make sure the prongs are secure. If the setting is damaged or doesn't protect the diamond well, you can reset the same stone in a safer design. Recutting is another option, but it removes some of the diamond's weight.

    Diagaa

    Diagaa

    Diagaa Jewelry is dedicated to creating exquisite diamond jewelery while helping customers make confident choices. Our experts share insights on diamonds, engagement rings, wedding jewelery, and gifting trends to inspire every special occasion.

    Leave a comment